Is your music too quiet even with the volume turned all the way up? If you’ve ruled out noise-induced hearing loss as the cause of your music being too low, there are software and hardware alternatives for making your headphones louder. It’s important to remember that you shouldn’t expose yourself to sound louder than 85dB(SPL) for a lengthy period of time, so protect your ears—you can’t reverse noise-induced hearing loss, just prevent it. With this in mind, here are some suggestions for making your headphones louder.
Check that your headphones are on, clean, and correctly fitted.
First and foremost, ensure that your headphones are properly connected in if wired, switched on and linked if Bluetooth, and that nothing is muted. Some headsets are easily muted while changing, so it’s simple to overlook.
The second most important factor to consider is that your headphones are clean. Earbuds, in particular, may collect a lot of earwax and debris, which can essentially prevent sound from entering your ears. Isopropyl alcohol, cotton swabs, paper towels, and a toothbrush are all you need to clean your earphones. To completely clean the earphones, use a cotton swab gently bathed in isopropyl alcohol and a toothbrush to remove any debris. Be cautious not to wet the earphones or get alcohol inside of them, since this might harm the inner of the earbuds. Check out our post on how to clean earphones for a comprehensive instruction.
Next, ensure sure your headphones are properly fitted. If you’re wearing in-ears, a fit test may be offered in the earbuds’ companion app. This might assist you in determining if sound is leaking from the way the buds fit in your ears. You may experiment with various ear tip sizes until you find one that fits well. If none of your ear tips fit, you may simply locate third-party ones. Over-ear headphones must also be securely sealed, but you must ensure that the ear pads are sealed around your ear. Gaps might be created by spectacles, a misaligned headband, or the headset just not fitting properly. Make any necessary adjustments to ensure you have the best seal possible.
Examine your device’s sound settings.
Check the sound settings on your playback device to ensure that they are not restricting your loudness. Phones have volume limits to protect your hearing, but you may disable that function if you wish to exceed that limit. You may also notice that one channel is louder than the other, which is usually due to a change in the balance of your channels. Many operating systems feature a sound option for adjusting the left-right balance, and if you move the slider to the center, both channels should sound equally loud.
If certain elements of your audio sound overly quiet in comparison to the rest, an equalization might help. Many bluetooth headphones and earbuds come with a companion app that includes an equalizer, allowing you to fine-tune your listening experience. If you don’t have a companion app for your headphones, certain streaming apps, such as Spotify on mobile and Apple Music for iOS, feature equalizers. You may also use a third-party equalization program, which I’ll discuss more in the next section.
How to Increase the Volume of Your Headphones Using Software
The way software choices for making your headphones louder operate varies. You may alter your EQ to make everything sound louder, making the music seem louder, however this may result in the audio sounding different than intended. Increase gain to make audio louder, but be aware that if maxed out, this might cause your audio to sound distorted, so use with care.
How to Make Your Android Headphones Louder
There are several Android applications available to assist you in changing your volume, such as VLC for Android, which enhances the loudness of a file by cranking up the gain. It’s important to note that cranking up the volume too much can ruin the audio and reduce the dynamic range.
If you want to try something different, there are plenty of possibilities in the equalization app area. Poweramp Equalizer, Wavelet, and Volume Booster GOODEV are all trustworthy alternatives, although some offer short trial durations. A genuinely free choice for Android is Music Volume EQ, although it contains a ton of advertisements, so you’ve been warned. These, thankfully, do not need root access to function on any audio on your device; instead, they recognize music from compatible applications, including most streaming services, and apply EQ settings to that audio. If you want it to work with other applications, you may need to go into the equalization app’s advanced settings.
How to Increase the Volume of Your Headphones on iOS
There is currently no system-wide mechanism to EQ an iPhone’s output. Certain applications only operate in a restricted capacity, such as when you play music via such apps. You may try Boom: Bass Booster & Equalizer, but it only has a three-day trial period.
How to Make Your Computer Headphones Louder
VLC is a fantastic tool that mostly functions as a media player but can also improve loudness. It does this by changing gain in the same manner as VLC for Android does, but with the proviso that cranking up the volume too high will result in a loss of dynamic range.
FxSound is a solid choice for Windows users since it uses EQ and compression to boost media loudness. If you have a Mac, eqMac enables you to modify EQ and effects for all programs on your computer, and operates kind of like a digital audio workstation (DAW), but for your device as a whole. Easy Effects operates in a similar fashion for Linux.
How to Increase the Volume of Your Headphones Using Hardware
There are other hardware alternatives for making your headphones louder, the most basic of which is an external amplifier. The main reason you’d want an amp is if you had a set of audiophile headphones with a high impedance or poor sensitivity, which means you need more power for louder sound. Most people shouldn’t need an amp, but if your headphones are too quiet and you want to increase the signal, there are many of nice amps available. Amps may be used with phones, laptops, and home audio equipment such as televisions, radios, and CD players.
It would also be worthwhile to invest in a USB audio interface, which you can connect to your computer through USB and plug your headphones into via the headphone socket. This is a rather clumsy choice, but there are many excellent alternatives if that is what you want.
How to make headphones louder? This post will show you how to increase the volume of your headphones. You may do this by tweaking the equalization settings on your smartphone, utilizing a volume booster software, or just cleaning the headphones. If you’re in the market for a new set of headphones, make sure to check out the recommendheadphone for some excellent prices.